Single Pro Stand, 0-5” H₂O
Magnehelic Gauge

The Scuba Instruments Single Pro Stand with Magnehelic gauge is the standard for manually checking regulator cracking effort.

The Dwyer Magnehelic gauge is a 0 -5” H₂O calibration range with ±2% FS accuracy. Both vacuum gauge ports are connected with push-to-connect fittings and allow positive or negative pressure measurements.

The Mouthpiece Adapter is used with the Pro Stands Magnehelic Gauge and provides an airtight seal on all diving industry second stages.

The Scuba Instruments Single Pro Stand with IP gauge is designed for the technician who prefers separate instruments.

The IP Gauge is a liquid dampened 4” Wika, 0-200 psi, rated ±1% FS accuracy. The IP gauge is protected by a pressure relief valve and the input port will fit all standard low pressure regulator hoses.
 

Dual Pro Stand, Magnehelic & IP Gauge

The Scuba Instruments Dual Pro Stand includes both Vacuum and IP gauges in a unitary mounting base and provides the ability to test all critical static regulator functions.

The Dwyer Magnehelic gauge is a 0 -5” H₂O calibration range with ±2% FS accuracy and the liquid dampened 4” Wika, 0-200 psi IP gauge is rated ±1% FS accuracy. Both vacuum gauge ports are connected with push-to-connect fittings and allow positive or negative pressure measurements. The IP gauge is protected by a pressure relief valve and the input port will fit all standard low pressure regulator hoses.